Drilling Equipment Sourcing, OCTG & Surplus Asset Management
We source hard-to-find drilling equipment, supply OCTG, and turn surplus assets into value — for operators and contractors worldwide. Based in the UK and Norway, with a network spanning Europe, the Americas, and Asia.
Our Core Services
Drilling Equipment
Buying direct from Rig Sourcing provides full traceability, documentation, and compliance. View equipment in stock for direct sale from us, or send us your equipment requirements for instant feedback at market rates.
View Equipment
OCTG
Certified new drill pipe and casing to meet your project specifications. We also help recover value from used pipe — a sustainable alternative to scrap.
Learn More
Asset Management
Turn idle equipment into returns. Work with us directly — we catalog your assets, establish market value, and manage the sale for maximum returns with minimal effort.
Learn MoreFeatured Equipment
Lift Sub Package
Package of lift subs and multi lift subs in a range of connections — NC 50, NC 38, 6 5/8 and 7 5/8 REG, 6 5/8 FH and MT57 — located in Norway. Every unit has been inspected to NS-2 3rd edition (MPI, visual and dimensional check of the connections) and accepted. Documentation packages and material certificates are on file for many units. Sold as one package. The full unit list is below; inspection reports and documentation are available on request.
Baylor 7838 Elmagco Brake
2 x Refurbished Baylor 7838 Elmagco Brakes, newly certified.
PH-50 Pipe Handler
Unused NOV PH-50 Pipe Handler for a TDS9S top-drive
TJ120 Iron Roughneck — NOV ST-120 Footprint
Unused iron roughneck built to the same footprint as the NOV ST-120, so it installs on existing ST-120 mounts and drill floor layouts with no structural changes. Tested and simulated at the factory, supplied with a full documentation pack (including CoC dated 2019) and a plug-and-play control software package. Available for short- or long-term rental, with an option to purchase. Day rates and availability on request. UK-built. Not manufactured by or affiliated with NOV.
6493m Certified 18 5/8" Casing
Package of casing with inspection reports.
3000m New 11 7/8" Casing
Package of un-used casing.
E3000 OilWell Drawworks
Oilwell E3000 Drawworks, Motors: 2 each EMD -89 MB ALB x 1200 HP each, line 1 3/4", drum has lebus grooving for drill line
EMD D79 electric DC Motor 800 HP
Manufacturer: EMD (Electro-Motive Division) Model: D79 Description: DC Drilling/Traction Motor
EMD D79 electric DC Motor 750 HP
Manufacturer: EMD (Electro-Motive Division) Model: D79 Description: DC Drilling/Traction Motor
Halliburton HT-400 twin Cement Unit
Haliburton 400 HT twin cementing unit with each pump driven by an 800 HP electric motor. Unit is equipped with cotta transmission and a 60 HP recirculating pump
2 x Baylor 7838 Elmagco Brake
2 x Baylor 7838 Elmagco Brakes, last inspected Dec 2020
2 x Oilwell A1700-PT triplex Mud Pumps
2 x Oilwell A1700-PT triplex mud pumps , 4 1/2" fluid end, powered by EMD D-79-MB electric motors, Hydril K20 pulsation dampners and 3" relief valves Liquid mud: 3,740 bbls. Bulk capacity: 13,300 cu. Ft.
BOP Control Unit + 2 x 12 Station Bottle Racks
BOP Control Unit with 2 x 12 Station Bottle Racks Condition: Unused CE.(Ex) ATEX/IECEX Type Approved Systems Manufacturer: CAD Control Systems Documentation/Drawings available
Cameron Model 70 18.3/4 10K
Unused Cameron Model 70 18.3/4 10K BOP
MHWirth DDM-750-AC Top Drive
Unused MHWirth DDM-750-AC top drive system complete with OEM data book. Stored in Europe, available for immediate inspection and sale.
NOV TDS4S Top Drive
NOV TDS4S top drive, unused since last NOV refurbishment in 2011. Ex-Maersk unit, well preserved with hard copy data pack available. Ready for deployment.
Cameron 18-3/4" 15K HC Collect Connector (NEW)
New/unused Cameron 18-3/4" 15K HC Collet Connector. BX-164 Clamp Hub Top x AX Clamp Hub Bottom. S/N 113076711-001. Still in manufacturer's original packaging with minimal re-certification requirements. Full documentation package available.
Continental Emsco C3 Type II Drawworks Drum Shaft
Continental Emsco C3 Type II drawworks drum shaft. Available for immediate sale. Contact us for further information.
3-1/16" 10K Choke Manifold
Refurbished 3-1/16" 10K choke manifold supplied with documentation papers.
3x GE752US2 Shunt Hi-Torq Top Drive Motors
3-off GE752US2 Shunt Hi-Torq top drive motors. Units have been fully rebuilt and are unused since rebuild. Available for immediate sale.
4x Siemens 1HT3 620kW DC Motors
Quantity 4 Siemens Type 1HT3 620kW DC motors. All units fully rebuilt and unused since rebuild. Available for immediate sale.
Cameron 11" 5K Single BOP — Unused
Unused Cameron 11" 5K single shear ram BOP. Features Ram Subassembly SBR with Upper and Lower Type DS. Additional documentation available upon request.
Why Choose Us
Why Work With Rig Sourcing
We're built on honest relationships and deep market knowledge. Based in Aberdeen, UK and Asker, Norway, we work directly with operators, contractors, and service companies to solve equipment challenges — fairly and efficiently.
Get in Touch- Can't find the equipment you need? We locate hard-to-find items through our network across Europe, the Americas, and Asia.
- Unsure what your equipment is worth? Our deep market knowledge ensures you get a fair price — buying or selling.
- Got surplus equipment heading for scrap? We buy it and find it a new project, so nothing goes to waste.
- Dormant assets costing you money? We handle everything from inventory to sale, turning idle equipment into returns.
- Need a partner who understands your market? We're physically present in the UK and Norway, working hands-on with operators globally.
- Tired of opaque deals? We're honest, direct, and focused on long-term relationships — not one-off transactions.